Filo animato CX18
CX18 is a no clean flux core wire solder designed to offer excellent soldering results with all alloys and on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.
Fast Wetting, Minimal/Clear Residue, Extends Solder Tip Life, ROL0 per IPC J-STD-004, REACH and RoHS Compliant (Lead-Free), Low Odor/Fumes.
CX18 is available in multiple lead-free alloys. Additional alloys and diameters may be available upon request.
Best results are obtained with a properly sized solder iron tip at a temperature between 300° – 400°C (575° – 750°F) for leaded alloys and 370° – 425°C (700° – 800°F) for lead-free alloys. If additional flux is required AIM NC280 liquid flux or NC217 gel flux are recommended.
Store cored wire in a clean, dry area away from moisture and sunlight. Do not freeze this product. 7 Years at < 85°F (< 29°C)
CX18 can be cleaned with commercially available flux removers. IPA is not recommended. Contact AIM for specific information.
Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.
More Cored Wire
Bulk Distribution & Commercial Supply
Built for volume distribution, our products are available for stocking wholesalers, retail suppliers, and commercial partners managing fleet or warehouse inventories. We support high-volume fulfillment, scalable ordering, and reliable supply chains for general-purpose repairs, maintenance, and commercial distribution. Reach out today to discuss contract pricing or regional distribution programs.









