RAD Flux #1

FEATURES

Product Overview

RAD Flux #1 is a water-based, inorganically activated liquid flux designed for radiator production applications. Though designed for application via foam fluxer, RAD Flux #1 may also be applied by dipping or brushing with favorable results. Since RAD Flux #1 is highly corrosive, all residues must be rinsed with water after soldering.

RAD Flux #1 is formulated for application via foam but may be brushed, or dipped as well. Flux pots should be plastic or titanium. When foaming, air stones should be supplied with compressed air, free of oil and moisture. Adjust foam head to achieve a uniform distribution of small bubbles for optimum flux coverage.
RAD Flux #1 can be cleaned in normal tap water; however, deionized water is recommended for the final rinse. Atemperature of 100? – 150?F is sufficient for removing any residues. An in-line or other pressurized spray cleaning system is suggested, but is not required.
RAD Flux #1 has an unopened shelf life of 1 year when stored at room temperature. Do not store near fire or flame. Keep away from sunlight as it may degrade product. RAD Flux #1 is shipped ready-to-use, no mixing is necessary. Do not mix used and unused chemical in the same container. Reseal any opened containers.
Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Material Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.
Heat Exchange, Industrial

Bulk Distribution & Commercial Supply

Built for volume distribution, our products are available for stocking wholesalers, retail suppliers, and commercial partners managing fleet or warehouse inventories. We support high-volume fulfillment, scalable ordering, and reliable supply chains for general-purpose repairs, maintenance, and commercial distribution. Reach out today to discuss contract pricing or regional distribution programs.